3D Model A Classic Dotted Dice | Zar yapımı

26 Mart 2009
Gönderen Ümit
Kategori: 3D | 3 boyut, Tutorials | Görsel Eğitim

 

Dotted Dice (Modeling simple models tutorial) - step 1
Hello again! In this tutorial I will show you how to quickly model a classic dotted dice.
Dotted Dice (Modeling simple models tutorial) - step 2
Start with a Chamfered Cube with 60 x 60 x 60 with 3 segments on all sides and with 2 Fillet Segs.
Dotted Dice (Modeling simple models tutorial) - step 3
Convert the Chamfered Box to an Editable Poly (right-click > Convert To > Convert To Editable Poly) or add an Edit Poly modifier. Go into Polygon editing mode (shortcut: “4″);

 

 

Dotted Dice (Modeling simple models tutorial) - step 4
Pick one of the sides and select the polygon in its center.
Dotted Dice (Modeling simple models tutorial) - step 5
On one of the adiacent sides Ctrl + select two polygons at opposed corners.
Dotted Dice (Modeling simple models tutorial) - step 6
On the other adiacent side Ctrl + select three polygons forming a diagonal.

 

Dotted Dice (Modeling simple models tutorial) - step 7
Ctrl + select six polygons like shown in the image above, on the side opposed to that with one poly selected.
Dotted Dice (Modeling simple models tutorial) - step 8
Ctrl + select the four cornering polygons on the side opposed to that with 3 polygons selected.
Dotted Dice (Modeling simple models tutorial) - step 9
Finally, Ctrl + select five polygons on both diagonals on the remaining face.

 

Dotted Dice (Modeling simple models tutorial) - step 10
Click the Inset dialog, set the Inset Type to By Polygon and the Inset Amount to 0.2 and hit OK.
Dotted Dice (Modeling simple models tutorial) - step 11
Now click the Bevel dialog, set the Bevel Type to By Polygon, the Height to -2 and the Outline Amount to -3.
Dotted Dice (Modeling simple models tutorial) - step 12
Add a MeshSmooth modifier with 3 Iterations and your dice is finished. That was easy!

 

 
  • Share/Save/Bookmark

Benzer Konular

Tags: , ,

Yorum Yap